Worth's Exhaust on University & Pulaski

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   I just wanted to get the word out, or maybe I'm the last to know.  Worth's Exhaust is awesome.  Every guy that works there is nice, and in the time I've spent there I've seen every customer walk away happy, one even insisting they pay more than the owner was asking because they are so satisfied. 

I've been there twice now, they don't mind making bends and selling them alone.  Each time I bought two bends, each time it was about $5 per bend.  Far better quality than what the parts stores have, since it's not a crimp bend and the tubing is about twice as thick.  I got to tell them the radius (4" was the smallest for 2 1/4 tube) and how many degrees.

So if you're building an exhaust and are pretty sure what bends you need, get them at Worths.  The owner's name is Jay, and he was OK with me posting up this info.

Edited by bkubisht - 09 October 2008 at 8:33am

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
bkubisht Members Profile Send Private Message Find Members Posts Add to Buddy List RCRC Club Visitor Joined: 27 June 2006 Location: Huntsville, Madison County Status: Offline Points: 556	Post Options Post Reply Quote bkubisht Report Post Thanks(0) Quote Reply Topic: Worth's Exhaust on University & Pulaski Posted: 09 October 2008 at 8:03am
	I just wanted to get the word out, or maybe I'm the last to know. Worth's Exhaust is awesome. Every guy that works there is nice, and in the time I've spent there I've seen every customer walk away happy, one even insisting they pay more than the owner was asking because they are so satisfied. I've been there twice now, they don't mind making bends and selling them alone. Each time I bought two bends, each time it was about $5 per bend. Far better quality than what the parts stores have, since it's not a crimp bend and the tubing is about twice as thick. I got to tell them the radius (4" was the smallest for 2 1/4 tube) and how many degrees. So if you're building an exhaust and are pretty sure what bends you need, get them at Worths. The owner's name is Jay, and he was OK with me posting up this info. Edited by bkubisht - 09 October 2008 at 8:33am
	3RZ swapped 1985 Toyota 4Runner

83K10 Members Profile Send Private Message Find Members Posts Add to Buddy List RCRC Club & Business Member Joined: 17 February 2004 Location: Huntsville, AL Status: Offline Points: 3259	Post Options Post Reply Quote 83K10 Report Post Thanks(0) Quote Reply Posted: 09 October 2008 at 1:39pm
	I've delt with Worth's Exhaust Center several times. They have been really good. We had them put the exhaust on the jeep. I think they did a really good job. They treated my wife nicely when she took it down there as well. John

Maloppa Members Profile Send Private Message Find Members Posts Add to Buddy List RCRC Club Visitor Joined: 28 May 2005 Location: United States Status: Offline Points: 79	Post Options Post Reply Quote Maloppa Report Post Thanks(0) Quote Reply Posted: 10 October 2008 at 2:16am
	I'm doing a YJ build and they will be building my exhaust for me. Used them ever since I've been driving.
	95 YJ 06 LJ

74chevystepside Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Poster Joined: 09 July 2005 Location: United States Status: Offline Points: 301	Post Options Post Reply Quote 74chevystepside Report Post Thanks(0) Quote Reply Posted: 10 October 2008 at 3:34pm
	they are good folks thats for sure
	KJ4DDC 2009 Red Rock 4 door JK. All stock 1994 Blueish YJ 3" body lift and 33's WOOT